- Tri-radiale cut
- High tenacity Nylon 1.5 oz
- Sewing triple point with anti UV thread
- Tear drop corner reinforcement system
- Port/starboard tapping
- Stainless eyelet
- Spi sail bag
- Luff : 14.20 m
- Foot : 7.71 m
- Luff : 14.20 m
- Sail's surface : 103 m²
- SMW : 7.91 m
Range of use for this spinnaker : :
Compared to the vertical axis, the spinnaker is, as its name suggests, symmetric. It is used with a pole to release the spinnaker from the tight coverage of the mainsail. This type of spinnaker is very beneficial to go downwind to angles that asymmetrical spinnaker could not reach. The spinnakers have a surface bigger than symmetrical spinnakers. The disadvantage of this type of spinnaker is that the use of a pole requires a larger crew and makes maneuvering a bit more complicated than for an asymmetrical spinnaker.
This inconvenience can however be eliminated by using a spinnaker sleeve (sold separately ) to facilitate the raising and the lowering of the spinnaker without risking a tear or involuntary maneuver. The spinnaker, very supported, will go downwind with a relative wind of 120 ° to 180 °. Its form, its share of directed cut " full radial "offers a remarkably stable profile and do not require constant adjustment . A great sail to go downwind safely.
Tips
How to prepare to launch an symetrical spinnaker :Attach the spinnaker bag to the front balcony thanks of the karabiners. Set the spinnaker pull in place with tack sheet going through it. Attach three conrners (halyard, clew, Tack) very carefully, check the inscription on the spinnaker. Start with hoisting the sail with the halyard, make sure to sail the boat completely off wind so the main sail will cut the wind of the spinnaker. When the spi is totally hoisted, pull the tack sheet while sailing slightly upwind. Then pull on the clew sheet till the spi is totally flying. To collapse: the easiest way to collapse is to put back the bag in the cockpit, ideally at the entrance of the cabin, then sail completely off wind, relase the tack sheet and pull directly on the clew sheet when the spi is behind the main, then release the halyard while taking the spi back in the bag. TIP:make sure to have the 3 corners visible on top of the bag when you de-rig the sheets and halyard.
Data sheet
- LUFF
- 14.20 m
- LEECH
- 14.20 m
- FOOT
- 7.71 m
- SMW
- 7.91 m
- AREA
- 103 m²
Specific References
-
Price CHF2,999.00
-
Symmetric Spi SYM4 - 64 m²
Price CHF1,680.00 -
Symmetric Spi SYM2 - 50 m²
Price CHF1,299.00 -
Symmetric Spi SYM6 - 81 m²
Price CHF1,899.00 -
Symmetric Spi SYM12 - 162 m²
Price CHF3,399.00 -
Symmetric Spi SYM16 - 241 m²
Price CHF4,599.00 -
Symmetric Spi SYM0 - 39 m²
Price CHF999.00 -
Symmetric Spi SYM9 - 115 m²
Price CHF2,499.00 -
Symmetric Spi SYM3 - 58 m²
Price CHF1,480.00 -
Symmetric Spi SYM14 - 198 m²
Price CHF3,999.00 -
Symmetric Spi SYM13 - 181 m²
Price CHF3,999.00 -
Symmetric Spi SYM10 - 129 m²
Price CHF2,599.00 -
Symmetric Spi SYM17 - 264 m²
Price CHF4,999.00 -
Symmetric Spi SYM15 - 220 m²
Price CHF4,299.00 -
Symmetric Spi SYM5 - 72 m²
Price CHF1,799.00 -
Symmetric Spi SYM-1 - 34 m²
Price CHF1,111.46